hylobates@jlai.lu to linuxmemes@lemmy.worldEnglish · 3 days agoIPv4 is hardjlai.luimagemessage-square174linkfedilinkarrow-up1708arrow-down16
arrow-up1702arrow-down1imageIPv4 is hardjlai.luhylobates@jlai.lu to linuxmemes@lemmy.worldEnglish · 3 days agomessage-square174linkfedilink
minus-squarezurohki@aussie.zonelinkfedilinkEnglisharrow-up3·3 days agoIf you use a /23 you can use the middle .0 too. My favourite dumb networking trick though is that Linux lets you use an IPv6 address as an IPv4 gateway. ip -4 route add default via inet6 fe80::1 dev eth0 That works so long as the gateway is running dual stack.
minus-squarejj4211@lemmy.worldlinkfedilinkarrow-up1·2 days agoBut why can’t I use IPX in my routing table for IPv4???
minus-squarepurplemonkeymad@programming.devlinkfedilinkarrow-up3·2 days agoMakes sense, the gateway is never a target of the ip packet, so it’s really only used to find the MAC address of the gateway.
minus-squarezurohki@aussie.zonelinkfedilinkEnglisharrow-up1·2 days agoIt makes sense if you think about it, but seeing IPv6 addresses in the IPv4 routing table still makes professional network engineers stop and boggle for a moment
If you use a /23 you can use the middle .0 too.
My favourite dumb networking trick though is that Linux lets you use an IPv6 address as an IPv4 gateway.
That works so long as the gateway is running dual stack.
But why can’t I use IPX in my routing table for IPv4???
Thanks I hate it.
Makes sense, the gateway is never a target of the ip packet, so it’s really only used to find the MAC address of the gateway.
It makes sense if you think about it, but seeing IPv6 addresses in the IPv4 routing table still makes professional network engineers stop and boggle for a moment